Solid 925 sterling silver

Make it yours.

Sterling silver doesn’t stand still. It responds to the air, the way you wear it and the life you live in it. Over time, its surface may deepen and darken, like a favourite pair of jeans becoming unmistakably yours.

Tarnish isn’t damage. It’s part of the material’s character, and you decide what happens next. This guide is for the Bent Ring, our Canadian-designed sterling silver ring for gay men.

Choose your finish

One ring. Three ways to wear it.

Bent Ring in sterling silver with a bright polished finish

Bright

Keep the silver bright and reflective with occasional cleaning and a silver-polishing cloth. A commercial silver dip may be used when needed, always follow its directions and rinse and dry the ring thoroughly.

Bent Ring in sterling silver with a dark aged patina

Aged

Leave it alone and allow the silver to darken naturally. Air, humidity and daily wear will gradually give the ring a deeper, more lived-in character.

Bent Ring with polished raised silver and a darker recessed patina

Contrasted

Let the recessed areas darken, then polish only the raised surfaces with a silver cloth. The lighter upper surfaces and darker background make the hidden design stand out.

The everyday method

Clean it gently.

Place the ring in warm water with a small drop of mild dish soap. Gently clean it with a very soft toothbrush, rinse thoroughly and dry it immediately with a soft, lint-free cloth.

For additional shine, finish with a polishing cloth made specifically for sterling silver.

Avoid toothpaste, scouring pads, bleach, strong household cleaners and abrasive baking-soda pastes. They may scratch the surface or create an uneven finish.

Cleaning a sterling silver ring

Remove the patina

Start again at home.

Line a small glass bowl with aluminum foil and place the ring directly against the foil. Add approximately one tablespoon of baking soda for each cup of very hot water.

Leave the ring in the solution for two to five minutes, checking it frequently. Remove it carefully, rinse thoroughly and dry immediately with a soft cloth.


This method removes patina, including the darker colour inside the design. Use it only when you want to reset the entire ring to a brighter finish.

The quicker method

A deeper black, in minutes.

Liver of sulphur gel is a quick, straightforward way to darken solid sterling silver, faster than the egg method. You can find jewellery patina gel on Amazon Canada.

  1. Clean first. Wash the ring thoroughly with warm water, mild dish soap and a very soft toothbrush. Remove all dirt, skin oils, grease and polishing residue. Rinse well, then avoid touching the silver with bare fingers.
  2. Prepare the gel solution in a dedicated glass or plastic container, following the product’s dilution and water-temperature instructions. Do not use boiling water.
  3. Use suitable gloves or tongs to dip the ring briefly, checking the colour as it develops. Repeat short dips until you achieve the depth of black you want.
  4. Stop the reaction using the product’s recommended neutralising bath, then rinse thoroughly and dry with a soft cloth.
  5. Leave it dark, or gently polish only the raised surfaces with a sterling silver cloth for contrast.

Follow the product label for protective gloves, eye protection, ventilation and disposal. Work away from children and pets. Never mix liver of sulphur with acids or other household chemicals.

Patination of a sterling silver ring

Home patina recipe

Darken it at home.

Before adding patina, wash the ring thoroughly to remove dirt, oils and polishing residue. Rinse well and dry it, then avoid touching the clean silver with bare fingers.

You can accelerate the natural patina using an ordinary hard-boiled egg.

Hard-boil an egg, then crush the warm egg inside a sealable container or zip-top bag. Place the clean, dry ring inside on a small separate dish or folded piece of paper so it does not touch the egg directly.

Seal the container and inspect the ring every 10 to 15 minutes. Turn it occasionally until it reaches the colour you want.

Remove the ring, wash it with mild dish soap, rinse thoroughly and dry it. Polish only the raised surfaces with a silver cloth to reveal the design against the darker background.

Open the container in a ventilated area and keep the setup away from children and pets.

There is no correct finish

Wear it your way.

Bright, darkened, polished or somewhere between, the Bent Ring was designed to become personal. Let time do the work, or take control of the finish yourself.

It’s yours now.

Finding your fit is part of making it yours. Before ordering, read our ring-sizing advice and choose your size with confidence.

Need help? Contact Bent Life, or read our Canadian shipping and returns information.

Shop the Original Bent Ring

Remove your ring before using chlorine, bleach or strong household chemicals. When it isn’t being worn, store it clean and dry.